Kompatibilní Wi-Fi karty

Z ICT security wiki | airdump.cz
Přejít na: navigace, hledání
Upravit.png Doplnit nebo opravit text můžeš i Ty.



Seznam nejpoužívanějších bezdrátových karet a upravených ovládačů (Packet Injection, Monitor Mode). Testované na distribuci BackTrack Linux 2, 3, 4, t.z je více než pravděpodobná funkčnost i v navazujících distribucích jako DVL, WiFiSlax, Ubuntu. Pokud víte o další kartě která v Backtrack nebo WiFiSlax funguje ale není v seznamu, přidejte ji. Informace pro další aktuální hardware a ovládače (rok 2011) najdete v textu Kompatibilní WiFi Hardware 2011.

Obsah

BackTrack 2, 3, 4 ovládače pro WiFi karty Index

BackTrack 2, 3, 4 obsahuje (kernel 2.6.20 a novější) tyto ovládače:

Odkazy pro ovládače nahoře odkazují na aktualní vývojářske webové stránky, kde najdete podrobnější informace (obvykle v angličtině). Odkazy nemusí být aktuální a patche můžou a nemusí fungovat.

Upozornění k VMWare a dalšímu virtualizačnímu software

VMWare a další virtualizační software neumožňuje operačnímu systému backtrack 2 nebo3 as guest plnohodnotní přístup k prostředkům bezdrátových karet. Výjmkou jsou USB bezdrátové karty, proto podporu wifi karet ve VMWare pro PCI, PCI-E, PCMCIA, miniPCI, miniPCIe, Express Card rozhraní neočekávejte. Pokud hledáte specifické informace podívejte se na (Talk Doplnit) nebo fórum.


Seznam testovaných karet

PCI

Asus WL-138g v2

  • Ovládač: bcm43xx
  • Chipset: Broadcom
  • Konektor externí anténa: Reverzní konektor (RP-SMA) with a odpojitelná antenna
  • Funguje.

Belkin F5D8001

  • Funguje.

CNet CWP-854

  • Ovládač: rt2500
  • Chipset: Ralink 2500
  • Externí konektor: RP-SMA
  • Funguje.

Dlink DWL-AG530

  • Funguje.

Dlink DWL-G520

  • Chipset: Atheros
  • Konektor externí anténa: RP-SMA
  • Funguje.

Dlink DWL-G550

  • Chipset: Atheros AR5212 (within AR5002X)
  • Konektor externí anténa: ano, omni-directional dipole antenna with 5dBi
  • Funguje skvěle.
  • odkaz D-Link

Dlink DWL-G510

  • Chipset: Ralink (pouze verze C, existují i jiné chipsety!(třeba s atheros čipem)
  • Konektor externí anténa: SMA-REV
  • Does not work anyway

---> Jisté Ralink chipsety jsou údajně podporovány. Více RT61 diskuze (anglicky).

Foxconn WLL-3350

  • Ovládač: rt2500

MSI PC60G

  • Ovládač: RT61
  • Chipset: Ralink
  • Funguje. Injekce atp (wireless tools) ale nefungují
  • Další informace.


Netgear WG311T

  • Ovládač: Madwifi-ng
  • Chipset: Atheros
  • Konektor externí anténa: RP-SMA konektor
  • Funguje skvěle včetně Injekce.

Netgear

Netgear WPN311

  • Ovládač: Madwifi-ng
  • Chipset: Atheros
  • Konektor externí anténa: RP-SMA konektor
  • Funguje skvěle včetně injekce.


SMC SMCWPCI-G

  • Chipset: Atheros
  • Typ antény: Externí SMA konektor (odpojitelná)
  • DosahOutdoor do 400m, Indoors do 100m
  • Funguje skvěle včetně injekce

Mini PCI (integrované)

Broadcom BCM4306 802.11b/g (revize 3)

Zařízení Kompatibilita
Hardware Software Internet Monitor Injekce
Dell 1350 WLAN Mini-PCI 2.6.20-BT-PwnSauce-NOSMP bcm43xx ano ano
HP Pavilion ZV5330us bcm43xx  ?  ?
HP Pavilion zd8000 bcm43xx ano ano  ?
Compaq Presario 2500 bcm43xx ano ano
  • Ovládač: bcm43xx
  • Notebook HP NX6110 model PT601AA#AKD
  • Notebook HP Pavilion ZV6170us (part of zv6000 series)
  • Notebook Compaq Presario V2405CA Not sure what chipset it is but doesn't work with built in Broadcom B/G
  • Notebook acer TravelMate 2413LMi Not sure what chipset it is but Packet injection does not work with buit in Broadcom B/G

Broadcom BCM4318 802.11b/g

  • Ovládač: bcm43xx
  • Notebook Compaq v2312us - It will capture packets but does not inject.
  • Notebook HP Pavilion dv5215us - Injekce funguje! viz fórum (anglicky). Nejdříve přepnout kartu do monitor módu (včetně nastavení kanálu cílového AP):
  • AirForce One 54g - Injekce funguje ale je potřeba použít aktuální balíček aircrack-ng (avizována funkčnost s 0.9)
bt ~ # ifconfig eth0 up
bt ~ # iwconfig eth0 mode Monitor channel #

Použít aireplay-ng útok 1 (fake authentication), pak útok 3 (ARP request replay attack). Výsledek ~40,000 paketů <5 minut.

  • Notebook Acer 5000 - Záznam paketů bez potíži ale nefunguje injekce.

IBM AR5212 802.11abg NIC (rev 01)

  • Ovládač: Atheros

IPW2100

  • Ovládač: IPW2100
  • Poznámka: Umí monitor mode, ale neinjektuje.

===================================== dodatek pro IPW2200 Pracuje s injection patchem. Jedná se o balíček ipw2200-1.2.1 + aircrack.0.90, stačí kompilovat a instalovat. Funguje Kismet i airodump-ng, aireplay -2 -3 -4 -5 a -9, nefunguje -0 a -1

IPW2200

  • Ovládač: IPW2200 (s injection patchem)
  • Boots Live and installs on hard drive detecting and installing the ipw2200 pached drivers perfectly (also on dual and multi-boot environments (MacOS, Vista, XP, BT)
  • About Injection, Void11 cannot be used to deauth stations. ONLY the "--interactive", "--arpreplay" and "--chopchop" options of Aireplay-ng work, due to an ipw2200 limitation. You must enable the rtap0 interface executing the following commands to make injection posible before doing anything else:
   - rmmod ipw2200
   - modprobe ipw2200 rtap_iface=1
   - ifconfig eth1 up
   - ifconfig rtap0 up
  • Injection has proven to be succesfull with "-i rtap0 eth1" interface parameter at the end of your aireplay-ng --arpreplay command. This allows to capture at the same time using the rtap0 interface with other programs. Example of arp injection command:
   - aireplay-ng --arpreplay -b 00:00:00:00:00:00 -h 11:11:11:11:11:11 -i rtap0 eth1
  • GUI Wireless tools are at early development. Sometimes they don't work as expected and network parameters must been set in konsole. Things may appear failing when they are actually working:
   - Wireless assistant may say "connection failed" but you are associated with the AP.
   - Running Kismet a 2nd time does not work because inteface is set in monitor mode.
   - Injection failing because deauth attack is not posible, but deauth is not the only method.
  • You may feel misfuncionalities when following tutorials step by step without ANY previous knowledge, especially those for Wep cracking because of its complexity. But the true is that full funcionality is found on this chipset except for a few injection attacks that doesn't prevent you from auditing WEP and WPA wireless security. But to achieve this you have to learn and master some essential of linux connectivity tasks, and commands to set up network parameters using the console and troubleshoot results. You only have to check the manuals, learn and practice all possible options of the following 5 commands to be succesfull with this nice integrated ipw2200 chipset:
   - ifconfig
   - iwconfig
   - iwlist
   - modprobe
   - ping


Aireplay only thing not working, will not inject even with the patch enabled. Kismet & AirMon didnot work for me. Kismet did work for me.

Dobrý tutoriál je zde.

This tutorial worked out of the box for me, no Ovládač patching required, however ony aireplay-ng injection attacks -2, -3, and -4 work though.


Injection is working alright, but you can only inject data frames (arp injecting works, for example). That means deauth and other attacks that may require management frames can't work. Bear in mind you must use rtap_iface=1 when loading the module to use the rtap interface, through which you can sniff while you inject in the eth interface (you have to do it that way or it won't work).

Be careful with the new 2.6 kernels, you may need to use irqpoll at boot to avoid an IRQ conflict on your computer -see below ipw3495 (in that case the conflicting device won't work at all so if it's just injection that fails, it's not an irqpoll problem).

We could not use any injecion on this due to it using Centrino technology.

WN360G

  • Ovládač: prism54
  • Use a PCI to MiniPCI adapter with it.
  • lspci output :
  • FCC ID: QDWWN360G

01:07.0 Network controller: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)

Mini PCIe (Built in)

  • Gigabit Atheros card works, but you have to use 'airmon-ng start wifi0' to set it into monitor mode.
  • Broadcom 4311-based Dell Wireless 1390 adapter is detected and works as mentioned below. Monitor mode works but packet injection doesn't seem to be working.

Atheros AR5006EG (AR5BXB61) 802.11b/g

  • Ovládač: ath_pci
  • Monitor: ano, Backtrack 4, Windows XP (CommView for WiFi, Airowizard)
  • Injekce: ano. Backtrack 4

Broadcom BCM4311 802.11b/g

  • Ovládač: bcm43xx
  • Ovládač: bcmwl5.sys
  • Notebook HP nx6315
  • Notebook HP nx7400
  • Notebook Dell Inspiron 1501
  • Notebook Dell Inspiron 1505\6400
  • Notebook Dell Latitude d820

D820 is detected and works but the BCM4311 chip does not work with packet injection

  • FCC ID: MXF-C941103G
  • Notebook Dell Dell d520
  • Notebook Compaq/Dell V2000US is NOT working. Packets appear to send but after testing on a separate card I was able to determine that Není of the attack modes work properly.

Windows Ovládače a klientský software.

PCI ID:
BCM43XG, PCI\VEN_14E4&DEV_4320&SUBSYS_00E70E11
BCM43XGT, PCI\VEN_14E4&DEV_4320&SUBSYS_12F4103C
BCM43XG1, PCI\VEN_14E4&DEV_4320&SUBSYS_12F8103C
BCM43XG2, PCI\VEN_14E4&DEV_4320&SUBSYS_12FA103C
BCM43XG3, PCI\VEN_14E4&DEV_4320&SUBSYS_12FB103C
BCM43XM1, PCI\VEN_14E4&DEV_4324&SUBSYS_12F9103C
BCM43XM2, PCI\VEN_14E4&DEV_4324&SUBSYS_12FC103C

BCM43XG1, PCI\VEN_14E4&DEV_4318&SUBSYS_1355103C
BCM43XG2, PCI\VEN_14E4&DEV_4318&SUBSYS_1356103C
BCM43XG3, PCI\VEN_14E4&DEV_4318&SUBSYS_1357103C
BCM43XM1, PCI\VEN_14E4&DEV_4319&SUBSYS_1358103C
BCM43XM2, PCI\VEN_14E4&DEV_4319&SUBSYS_1359103C
BCM43XM3, PCI\VEN_14E4&DEV_4319&SUBSYS_135A103C

BCM43XG11, PCI\VEN_14E4&DEV_4311&SUBSYS_1363103C
BCM43XG12, PCI\VEN_14E4&DEV_4311&SUBSYS_1364103C
BCM43XG13, PCI\VEN_14E4&DEV_4311&SUBSYS_1365103C
BCM43XM11, PCI\VEN_14E4&DEV_4312&SUBSYS_1360103C
BCM43XM12, PCI\VEN_14E4&DEV_4312&SUBSYS_1361103C
BCM43XM13, PCI\VEN_14E4&DEV_4312&SUBSYS_1362103C
BCM43XM14, PCI\VEN_14E4&DEV_4312&SUBSYS_135F103C

IPW3945

  • Ovládač: IPW3945
  • Poznámka : Zavést ovládače pomocí KDE menu nebo cd /usr/src/drivers/ipw3945-1.2.0/ && ./load
  • Poznámka : Umí monitor mode, ale nemusí injektovat
  • Poznámka : Není odvěci startovat Live CD s cheatem "bt irqpoll" Stručně rečeno, díva se co se děje u startu a pokud to mrzne prubni "bt irqpoll". Detailní informace o systému na kterém distribuci provozuješ najdeš v dmesg
  • Poznámka : Ovládač zastaral, odporúča sa použiť iwl3945

IPWRAW (IPW3945 Monitor + Inject)

  • Ovládač: IPWRAW, postup najdeš zde.
  • Poznámka : Ovládač zastaral, odporúča sa použiť iwl3945
  • Nebo jednoduše použij lzm modul. Najdeš zde.
  • Poznámka: Ovládač není v Backtrack 2 zaveden.
  • Poznámka : Uzamčen v monitor módu lze použít v rámci všech aireplay-ng útoků.
  • Kismet, edituj kismet.conf na "source=ipw3945,wifi0,Intel"
  • Upozornění: Po startu airodump-ng opatrně, naráz pouze jeden příkaz jinak systém mrzne.
 ifconfig wifi0 down
 #Change to AP BSSID
 nano /sys/class/net/wifi0/device/bssid
 # Channel of AP
 nano /sys/class/net/wifi0/device/channel
 # Change from 108 to 2
 nano /sys/class/net/wifi0/device/rate
 ifconfig wifi0 up
 airodump-ng rtap0
 #wifi0 is used for all other commands.

IWL (IWL3945 Monitor + Inject)

IPW4965/IWL4965 AGN

  • Monitor: ano, Backtrack 3
  • Injekce: ano. Backtrack 4

PCMCIA Cards

3COM 3CRWE154G72 v1

  • Ovládač: prism54
  • Chipset: Conexant PrismGT FullMAC
  • Upozornění : other revisions of this card are not prismGT FullMAC

3COM 3CRPAG175B with XJACK Antenna

  • Ovládač: Madwifi-ng
  • Chipset: Atheros AR5212
  • Notes : detected at boot time, Injekce funguje, everything goes like in aircrack-ng tutorials

Agere Systems ORiNOCO GOLD PC Card Classic

  • Notes: see Enterasys Roamabout 802.11 DS High Rate

AirLink101 AWLC4130

  • Ovládač: Madwifi-ng
  • Chipset: Atheros
  • Notes: Found at boot up. Forum users report 100% working, making this the cheapest working Atheros (and maybe overall) card out tzde.

ASUS WL100G

  • Ovládač: bcm43xx
  • Chipset: Broadcom BCM43xx
  • Notes: It is found at boot-up and is ready to go.

Belkin F5D6020 v3

  • Ovládač: Realtek
  • Chipset: rtl8180
  • Notes: Requires terminal input of iwconfig and dhcpcd wlan0
  • Notes: Full capability and injection

Belkin F5D7010 V1000

  • Ovládač: bcm43xx
  • Chipset: Broadcom BCM43xx
  • Notes: Detected at boot-up and is ready to go. Didn't have an opportunity yet to test the packet injection so can't report on that.

Belkin F5D7010 V3000UK

  • Ovládač: RT61
  • Chipset: Unknown will update later (SORRY)
  • Notes : Detected at boot-up with final BT2 (ra0). I have no had any problem to put it in Monitor mode; unfortunately packet injection does not work.

Belkin F5D7010 V5000

  • Ovládač: Atheros
  • Chipset: Atheros
  • Notes : Works great from what I could tell. Detected at boot-up with latest BT2. Packet injection appears to work.

Belkin F5D7010 V6000

  • Ovládač: RT61
  • Chipset: Ralink
  • Notes: after untar the files, in the Module dir, make clean, make debug and then make install then modprobe rt61 debug=1

Belkin F5D7011

  • Ovládač: bcm43xx
  • Chipset: Broadcom 4306
  • Notes: Picked up on boot and I can inject into my router without a problem.

Buffalo WLI-CB-G54HP

  • Ovládač: bcm43xx
  • Chipset: Broadcom BCM43xx
  • Notes: It is found at boot-up and is ready to go. Packet Injekce funguje perfectly.
  • Awaiting to test, will update my feedback, has anybody used this yet?
  • After testing this card against others I have found that the attack modes do not work properly, They will read off but have no effect. However, Monitor mode is possible. 8-11-2007

Cisco AIR-LMC350

  • Ovládač: airo_cs
  • Chipset: Cisco Aironet
  • Monitor mode HOWTO
  • Poznámka : airodump-ng output on wifiX shows garbled output whilst ethX does not work. Kismet will work with this card. More information: airo

Cisco AIR-PCM350-T

  • Ovládač: airo_cs
  • Chipset: Cisco Aironet
  • Monitor mode HOWTO
  • Poznámka : airodump-ng output on wifiX shows garbled output whilst ethX does not work. Kismet will work with this card. More information: airo

Cisco Aironet AIR-CB21AG-A-K9

  • Ovládač: Madwifi-ng
  • Chipset: Atheros
  • lspci: 03:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)

Dlink DWA-645

  • Ovládač: Madwifi-ng
  • Chipset: Atheros AR5416 a/b/g/n
  • Konektor externí anténa: Není
  • Comments: BT2's copy of madwifi cannot be detected. You will either need to download the latest Ovládač from madwifi.org or from the cvs/svn trunk. The N part of this card will not work as tzde are no support under madwifi yet. Kismet could use the b and g portion of the card but n remains untouched. Slow network detection too with built-in antennas.

Dlink DWL-650+

  • Ovládač: acx100
  • Chipset: Texas Instruments ACX100
  • Poznámka: Enable the drivers via KDE menu or cd /usr/src/drivers/acx100/ && insmod ./acx100.ko

got an error and modified it a bit and it worked. cd /usr/src/drivers/acx100 && insmod ./acx.ko

Dlink DWL-G650

  • Ovládač: Madwifi-ng
  • Chipset: Atheros AR5212 a/b/g
  • For Kismet, edit your kismet.conf file (/usr/local/etc/kismet.conf) to "source=madwifi_g,wifi0,Atheros"
  • Upozornění: To set up into Monitor Mode type:

<pre>airmon-ng start wifi0 ifconfig ath1 up iwconfig ath1 mode Monitor </pre>

Dlink DWL-G630, 650+/-

All these cards use the same system as the G650. the 650+, 650-, G650, G630 in that order are from past to present on the configuration of the cards. The 650+/- series are now outdated and unsupported by dlink, but i still host the drivers off my server. www.theneosa.org And the G650 was to replace the 650+/-, but was replaced by the G630

Dlink DWL-G650M

  • (SEE ABOVE FOR STATUS OF THIS CARD.)
  • Chipset: Atheros Communications, Inc. AR5005VL 802.11bg Wireless NIC (rev 01)

Dlink DWL-G650+

  • Ovládač: Ndiswrapper
  • Chipset: Texas Instruments ACX100

Upozornění : NdisWrapper will never work with Aircrack-ng Suite (SEE ABOVE FOR STATUS OF THIS CARD)

D-Link WNA-1330

  • Ovládač: Madwifi-ng
  • Chipset: Atheros

When the card is enabled and in monitor mode it can not change back to channel 1 via iwconfig commands.

iwconfig ath0 channel 1

Will not work. It will not COMPLAIN either. So unless you are actually double-checking the freq you are on, you don't know that it's not working.

To get the card back on channel 1 for monitoring, you'll have to ifconfig ath0 down, iwconfig ath0 channel 1, and then ifconfig ath0 up.[1]

Enterasys Roamabout 802.11 DS High Rate

The firmware supplied cannot be used to monitor as orinoco_cs notes the firmware as buggy. Suggested to downgrade the firmware may help. You will need to downgrade to 7.52 and apply 3.2.1 patch.

http://gentoo-wiki.com/HOWTO_Orinoco_USB#Kismet Hermes I Verze for sniffing.

  • Update:

Theoretically one is able to use airjack to make hermes do some mitm attack however that will require more deeper analysis.

Gigabyte GN-WM01GT AirCruiserG Mach G

  • Ovládač: madwifi-ng
  • Chipset: Atheros
  • 2.4Ghz 802.11b/g 108Mbps with internal antenna.
  • Upozornění : Seems to work 100%. Interface is: ath0

Lucent Technologies Orinoco Silver

Funguje skvěle. However, this card doesn't support packet injection because it is Hermes I based. It is perfect for wardriving and sniffing wireless networks though.

  • Note: see section: Enterasys Roamabout 802.11 DS High Rate

Linksys WPC11v4

  • Ovládač: Maxim
  • Chipset: rtl8180
  • Notes: Requires terminal input of iwconfig and dhcpcd wlan0
  • Notes: Full capability včetně injekce

Linksys WPC11v4

  • Ovládač: Philips SA2400
  • Chipset: rtl8180
  • Notes: Requires terminal input of iwconfig and dhcpcd wlan0
  • Notes: Full capability včetně injekce

Linksys WPC54G v3

  • Ovládač: bcm43xx
  • Chipset: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
  • Subsystem: Linksys WPC54G-EU Verze 3 [Wireless-G Notebook Adapter]

Monitor mode currently supported but injection may or may not work. Apparently a new Ovládač is coming out dubbed as b43 and is only available in either kernel 2.6.24 and wireless-2.6 git. Injection may not work even patching b43 drivers, in the meantime bcm43xx Ovládač is outdated and has problems every now and then.

Motorola WN825G v2

  • Ovládač: bcm43xx
  • Chipset: Broadcom 4306

Card is recognized in response to "iwconfig" but LEDs do not illuminate until "ifconfig eth# up". Injection not tested but should work similarly to other Broadcom cards. See zde for Broadcom injection.

NetGear MA401

  • Ovládač: HostAP
  • Chipset: Prism 2

To inject packets you have to load the HostAP Ovládač. [2].

NetGear WPN511

  • Ovládač: Madwifi-ng
  • Chipset: Atheros
  • Comments: Monitor mode and packet injection supported. All current supported attack modes 0-5 tested and working perfect.

NetGear WPN511 - Range Max

  • Ovládač: Madwifi-ng
  • Chipset: Atheros AR5212 a/b/g
  • Internal Antenna: 2 x Hirose UF.L. One of them has konektor the other does not have one soldered on.
  • Comments: Monitor mode and packet injection supported. Also known as WPN511GE, exactly the same chipset.

NetGear WG511T

  • Ovládač: Madwifi-ng
  • Chipset: Atheros
  • Notes: Works with Backtrack, (out of the box).

Supports all current Aireplay-NG attacks (-1,-2,-3,-4,-5)

If you can't get this card to run in Monitor mode try the following:

BT ~#airmon-ng stop ath0

BT ~#airmon-ng start wifi0

Then run iwconfig and check if ath0 is in Monitor mode. If it still isn't, try the following:

BT ~#ifconfig ath0 down

BT ~#airmon-ng start ath1

wifi0 should now parent ath1, and ath1 should be in Monitor mode. If it isn't, try:

BT ~#airmon-ng start wifi0

NetGear WAG511v2

  • Ovládač: Madwifi-ng
  • Chipset: Atheros

NetGear WG511 v1

  • Ovládač: prism54
  • Chipset: Conexant PrismGT FullMAC
  • Upozornění : v2/v3 and other revisions of this card are not prismGT FullMAC!
  • lspci: 03:00.0 Network controller: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)

Works great with Backtrack 2 Final, have cracked many WEP keys. Supports packet injection.

NetGear WG511v2

  • Chipset: Marvell
  • lspci: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03)
  • lspci -n : 11ab:1faa (rev 03)
  • FCC ID : PY3WG511V2H1
  • CANADA ID : 4054A-WG511V21
  • CE : 0470

Doesn't Funguje.


Update: The card may work with the Ovládač available zde: http://lists.infradead.org/pipermail/libertas-dev/2007-August/000641.html

However, you will need to upgrade to 2.6.25.4 and obtain compat-wireless.

Netgear WG511U

  • Ovládač: Madwifi-ng
  • Chipset: Atheros AR5212 a/b/g
  • Konektor externí anténa: Není
  • Internal Antenna: 2 x Hirose UF.L. One of them has konektor the other does not have one soldered on.

NetGear WPN511GR

  • Ovládač: Madwifi-ng
  • Chipset: Atheros

Netgear WPNT511

  • Ovládač: N/A *Windows only: ndiswrapper*
  • Chipset: Airgo AGN300 True MIMO
  • Konektor externí anténa: Není
  • Comments: No linux drivers yet. Ndiswrapper may work for normal connection but nothing else.
  • Update: Linux native (alpha stage) available: http://sourceforge.net/projects/agnx80211Ovládač/. This requires kernel Verze either 2.6.24 or wireless-git-2.6.24 package. Not recommended for beginners and not patched at all yet.

PROXIM ORiNOCO 802.11b/g Gold (Model: 8470-WD)

  • Ovládač: Madwifi-ng
  • Chipset: Atheros
  • Upozornění : To set monitor mode type "airmon-ng start wifi0" and then use ath1
  • If your card does not appear to be recognized when you first insert it, type "modprobe ath_pci" and then run "dmesg" again.
  • For Kismet, edit your Kismet.conf to "source=madwifi_g,wifi0,Atheros"

Windows drivers and klientský software: http://support.proxim.com/cgi-bin/proxim.cfg/php/enduser/std_adp.php?p_faqid=1082

Linux drivers: http://www.madwifi.org

Senao NL-2511CD PLUS EXT2

  • Ovládač: HostAP (wlan-ng drivers have been removed from BT2 final. See zde to use HostAP Ovládač)
  • Chipset: Prism 2.5
  • Firmware : 1.74 is suggested, check [zde] for instructions.
  • FCC ID: NI3-2511CD-PLUS3
  • For Kismet, edit your Kismet.conf to "source=hostap,Wlan0,Prism2"
  • To raise the output of this card to 250mw Not verified

Caution! This might destroy your card if you do not know exactly what your doing!
The change in readmif seems stable only in Master mode.

ifconfig wlan0 up
iwpriv wlan0 alc 0
iwpriv wlan0 readmif 116   [-> actual powertx value]
iwpriv wlan0 writemif 62 49 [-> I've no idea at all why "49"]
iwpriv wlan0 readmif 116  [-> now showing something around 252]

With a Spectran HF-2025E spectrum RF analyzer from elektrosmog.de
zde are the results: [3][4][5]
Force the card to give the maximum txpower.

iwpriv wlan0 alc0
iwpriv wlan0 writemif 62 128 

Force the card to give the somewhat minimum txpower.

iwpriv wlan0 writemif 62 127

Senao Sl-2511CD Plus EXT2

  • Ovládač: HostAP
  • Chipset: prism 2.5
  • Firmware : 1.74 is suggested

Senao SL-2511 CD PLUS (the one w/o Externí konektor)

  • Ovládač: HostAP_cs
  • Chipset: prism 2.5
  • Firmware : 1.74 is suggested.
  • To upgrade/downgrade your firmware to 1.74, please read this:

http://linux.junsun.net/intersil-prism/

Sitecom WL-100b

  • Ovládač: bcm43xx
  • Chipset: Broadcom 4306
  • Konektor externí anténa: Není
  • Notes: Tested with BackTrack 3 beta released on 14th December 2007, 700MB CD Verze (bt3b141207.iso).
  • Notes: Both monitor mode and packet injection work fine (with the following caveats below).
  • Notes: The wireless interface is eth1, and it must be "brought up" before use. The command to do this is:
ifconfig eth1 up

You will now see the "Power" and "Link" lights have turned on, which indicates that the card is ready for use.

  • Notes: When using the --arpreplay option of aireplay-ng, the default packet speed is too fast for the bcm43xx Ovládač to handle, so it keeps crashing every hundred packets or so. To fix this, add option: "-x 30" to the command line, which will limit aireplay-ng to 30 packets per second. I've found that "30" is the highest value it can take without crashing. This will slow things down quite a bit, but not too badly and at least it works.

SMC 2532W-B

  • Ovládač: HostAP
  • Chipset: prism2.5

SMC SMC2536W-AG

  • Ovládač: Madwifi-ng
  • Chipset: Atheros AR5212 a/b/g
  • External Antenna : Není

SMC WCB-G

  • Ovládač: Madwifi-ng
  • Chipset: Atheros

SWEEX LW051 ver:1.0

  • Ovládač: Madwifi-ng
  • Chipset: Atheros AR2413A
  • Notes: It is found at boot-up and is ready to go, but BT2 says it is a AR5212 which seems to make no difference. Packet Injekce funguje perfectly.

TP-link SuperG&eXtended Range 108M Wireless Cardbus Adapter(TL-WN610G)

  • drivers : MadWifi-ng
  • Chipset  : Atheros AR5212 802.11abg NIC (rev 01)

TP-link eXtended Range 54M Wireless Cardbus Adapter (TL-WN510G)

  • drivers : MadWifi-ng
  • Chipset  : Atheros AR5212 b/g

Ubiquiti SRC

  • Ovládač: Madwifi-ng
  • Chipset: Atheros AR5212 a/b/g
  • FCC ID: SWX-SRC
  • lspci: 03:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)

Product Page

Wistron WLAN 802.11a/b/g Cardbus CB9-GP

  • Ovládač: ath-pci
  • Chipset: Atheros AR5212

X-Micro WLAN 11g PCMCIA Card (XWL-11GPAG)

  • Ovládač: Madwifi-ng
  • Chipset: Atheros

ZCom XI-325HP+

  • Ovládač: HostAP
  • Chipset: Prism 2.5

Zyxel ZyAIR G-100 PCMCIA Card (FCC ID:N89-WE601l)

  • Ovládač: prism54
  • Chipset: Conexant PrismGT FullMAC

USB Dongles

Airlink101 AWLL3026

  • Ovládač: zydas
  • Chipset: zd1211rw
  • Nice USB Dongle. Inexpensive (<$10). Easy to antenna mod. Full capability and injection


ALFA Networks AWUS036H

  • Ovládač: rtl8187
  • Chipset: Realtek 8187
  • For Kismet, edit your Kismet.conf to "source=rt8180,wlan0,ALFA"

This card Funguje včetně injekce with BackTrack3

ASUS WL-167G

  • Ovládač: rt73 (older Verze rt2570)
  • Chipset: rt2571WF (older verson Ralink 2570)

Upozornění : Range is moderate but both monitor mode and injection work perfectly. Injects IV's at a very slow rate (about 300-500 IV's per minute), taking about 35 hours to collect 1,000,000 IV's.

AVM Fritz!Wlan USB V1.1

  • Ovládač: ndiswrapper
  • Chipset:Texas Instrument TNetW1450
  • Upozornění : NdisWrapper will never work with Aircrack-ng Suite

Upozornění : Works fine even with WPA/WPA2 encryption.Used ndiswrapper Verze 1.39 and the windows drivers from the cd.

Belkin F5D7050 V1

  • Ovládač: rt2570
  • Chipset: rt2571F

Worked fine upon boot. My Verze 3 card did not go into monitor mode.

Later Verzes (don't know which ones) use the bcm43xx chipset from broadcom. 'modprobe bcm43xx' then 'ifconfig -a' you will see your adapter as ethX

    • It will not inject packets **

Belkin F5D7050 (4000 series)

  • Ovládač: zd1211rw
  • Chipset: zd1211b

Upon boot, works fine in monitor mode but doesn't inject packets. However, if you patch the kernel following the instructions at [6], packet Injekce funguje great. After patching, all of the various attacks (fragementation, chopchop, arp replay, fakeauth) work fine with aircrack-ng.

Belkin F5D7050B

  • Ovládač: rt73
  • Chipset: Ralink 2570

Works fine on boot including packet injection.

Belkin F5D7051

  • Ovládač: ??
  • Chipset: bcm4320

Belkin have changed the chipset that they use in the usb adapters apparently. They now use the bcm4320 chipset instead of the ra2570. The bcm4320 drivers dont work with usb devices (see zde: http://linuxwireless.org/en/users/drivers/bcm43xx) and ndiswrapper complains that alternate Ovládač is the ra2570. No amount of blacklisting or 'rmmod ra2570', from my experience, will get this working.

Buffalo Airstation G54 WLI-U2-KG54-AI (2A)

  • Ovládač: rt2570
  • Chipset: Ralink 2570

Chiefmax

  • Ovládač: RT73
  • Chipset: rt2571WF

D-Link DWL 122 (USB) F/W 3.2.1 H/W A1

  • Ovládač: wlan-ng
  • Chipset: prism 2.5
  • Upozornění : Injection doesn´t work (because wlan-ng doesn´t support)!
  • Upozornění : Tzde are drivers for injection however they only work on 2.4 kernels. Can be found zde [7]

D-Link DWL G122 (USB) F/W 2.03 B1

  • Ovládač: rt2570
  • Chipset: Ralink 2570
  • lsusb : Bus 1 Device 3: ID 2001:3c00 D-Link Corp. [hex] DWL-G122 802.11g rev. B1 [ralink]
  • Upozornění : rev. C1 Používá [ralink] RT73

This dongle must be tweaked if u want to inject with it. Additionally, its covering is very limited, recommended a cantenna!!!

Wzde did I see last time a great how to about???

D-Link WUA-1340

  • Chipset: Ralink 2571 (RT73)
  • Note: At first, this adapter injected very well... Today (one day after the dongle was purchased) it won't work at all. I'm having the same problem as the DWL-G122 - it's fried! I'm sure it has the same faulty resistor as the g122. DO NOT BUY - WASTE OF MONEY!
  • Note: I have been using this adapter for backtrack and it's worked fine for the past month, haven't had any problems with it.
  • Note: I just received this adapter. Have Backtrack 2 on USB, looked through a few tutorials, and cracked my AP with 64 and 128 bit WEP encryptions. I've had no problems at all with the adapter. Pay no attention to the first Note. This adapter is totally worth it, and cheap if you look in the right places.

Edimax EW-7317UG

  • Ovládač: zd1211rw
  • Chipset: zd1211
  • Upozornění: After updating aircrack suite to aircrack-ng 1.0 dev. Monitor mode and packet injection supported.

Edimax EW-7318USG

Linksys WUSB54g v4

  • Ovládač: rt2570
  • Chipset: Ralink 2570

No problems with any injection (kismet, airodump...). Very good USB dongle.

Does not capture WPA/WPA2 handshake.Update Ovládač to v.1.6.0

Extremely easy to antenna mod.

Linksys WUSB54GC

  • Ovládač: RT73
  • Chipset: Ralink Technology, Corp. 802.11b/g WiFi
  • Upozornění 1: The interface is named rausb0, not eth0 or ath0 etc.
  • Upozornění 2: Built-in [BackTrack] Ovládač does not support fragmentation attack; however, the following Ovládač does:

http://homepages.tu-darmstadt.de/~p_larbig/wlan/rt73-k2wrlz-2.0.1.tar.bz2

Needs activation before use

  bt ~ # ifconfig rausb0 up
  bt ~ # iwconfig rausb0 mode monitor

Everything works out of the BT3 box!

MicroEdge MEG55A Wireless-G USB Dongle

  • Ovládač: rt2570
  • Chipset: Ralink rt2570
  • Upozornění : Works fine out of the box. airmon-ng start rausb0 kicked straight into monitor mode, successfully reinjects packets while monitoring.

NetGear WG111v2

  • Ovládač: rtl8187/prism54(?)
  • Chipset: Realtek RTL-8187L / Intersil-Conexant GW3887
  • FCC ID : PY305400026 / PY3WG111V2

Be careful not all wg111v2 sticks have the realtek chipset the v2 with the word netgear set into the stick. To verify the differences, type `lsusb' when you have the device connected. Apparently, older Verzes of this card is equipped with Conexant and the later Verzes are with Realtek. Tzde has been no easy way of identifying the difference between the two apart from checking the FCC ID or via plugging it in.

  • USB ID: 0846:6a00 is Realtek RTL-8187L chipset
  • USB ID: 0846:4240 is Intersil/Conexant GW3887 chipset (source)
  • RTL8187L users : drivers are available on the forum however the range on this card in my opinion is poor.
  • GW3887 users : Tzde has been some drivers floating around but the results shows that the Ovládač is having difficulty communicating with any other wireless devices. It is possible to monitor (unverified), but any transmission may not work and/or caPoužívá system to do a hard lock. Ndiswrapper may help for the time being until kernel Verze 2.6.24 comes out with the p54 Ovládač. For the eager ones, wireless-2.6 git may work with such cards but this again is not verified.

NetGear WG111T

  • Ovládač: ndiswrapper
  • Chipset: Atheros
  • Upozornění : NdisWrapper will never work with Aircrack-ng Suite

<pre> You can breath life to your small USB-WG111T by doing the next steps: 1)Download and extract the OvládaÄ (using wine?) from Netgear As of 2008-03-29, OvládaÄ 2.1 is zde: http://kbserver.netgear.com/release_notes/d103172.asp 2)change to root shell 'sudo su -' 3)rmmod ndiswrapper 4)ndiswrapper -i netwg11t.inf 4)modprobe ndiswrapper 5)iwconfig </pre>

Netopia ter/gusb-e

  • Ovládač: rt2570
  • Chipset: Ralink Technology, Corp. 802.11g WiFi
  • Upozornění : works fine as i know

OvisLink Evo-w54usb

  • Ovládač: rt2570
  • Chipset: Ralink 2570
  • Upozornění : Injekce funguje, just have to "ifconfig rausb0 up" before anything

SafeCom SWMULZ-5400

  • Ovládač: zd1211rw
  • Chipset: zd1211b
  • Upozornění : Works with packet injection with new patch found in aircrack-ng 0.8

ZyDAS 1211

  • Ovládač: zd1211rw
  • Chipset: ZyDAS Chipset
  • Upozornění : For basic functionality, you need to get the firmware from [zde], untar it to /usr/lib/firmware/ - reinsert the card and the firmware should load OK. Addendum: I had to unzip to /lib/firmware/zd1211, but after that it worked fine.

SMCWUSB-G EU

  • Appears to use a ZD1211 chipset.

MSI US54SE

Verze 1

  • Appears to use a ZD1211 chipset.

Verze 2

  • Používá rt73 chipset.
  • Upozornění: Tato specifická rt73-verze není zatím podporována.

Hawking HWUG1

  • Ovládač: rt73
  • Chipset: ralink
  • Injekce a monitor mode funguje, stačí "ifconfig rausb0 up"
Jmenné prostory

Varianty
Akce